ECO filters are compact and can be retrofitted in existing extrusion lines without any problems. They are designed for a maximum throughput of 1000 kg/h (ECO 200) or 3000 kg/h (ECO 250) depending on the capacity requirements. The central component of these filters is a slowly rotating, cylindrical screen with millions of conical holes which is driven by a servo motor and can be supplied in a variety of sizes. When melt flows through the filter, contaminants are retained on the outside of the screen. Solid contaminants as well as gels, high-molecular and cross-linked fractions remain on the screen’s outer surface, which is continuously wiped clean by a scraper. The particles are then discharged from the unit by means of a discharge shaft, which is driven by a second servo motor. The cleaned melt on the inside of the drum is supplied to the downstream die via a system of flow channels.
The continuous cleaning principle has the advantage that blockage of the holes is avoided. This ensures a steady pressure upstream of the screen, so that no contaminants which were originally retained are inadvertently forced through the holes, impacting on the purity of the melt. Due to the extremely long interval between screen changes – several weeks or even months – in combination with the ultra-low melt losses, Ettlinger’s ECO high performance melt filters contribute to a decisive improvement in the cost efficiency of recycled PET bottles.
www.ettlinger.com
