Back

EREMA at Drinktec/PETpoint 2009: Food-contact grade PET recycling


At this year's Drinktec (featuring an integrated PETpoint) from 14 to 19 September in Munich, the Austrian recycling specialist EREMA (www.erema.at) will be presenting its expertise in the field of technological, high-quality and cost-efficient plastic recycling in Hall B3, Stand 424. A focal point here will be the reprocessing of waste post-consumer plastic, in particular PET bottle flakes, to make recycled pellets that are suitable for food contact again, as documented by many national and international certification organisations. Unlike conventional, multiple-stage processing techniques, the patented VACUREMA® technology used for this purpose produces a highly pure material in one single pass with low specific energy consumption that is unrivalled. The modular VACUREMA® concept enables you to configure the perfect system in terms of both technology and economy for any application, according to the desired IV (IV – intrinsic viscosity as a comparative measurement for the molecular weight) of the recycled pellets made, ranging from the VACUREMA® BASIC (IV virtually the same as the starting material) and the VACUREMA® ADVANCED (IV increase up to 6%) to the top expansion stage, VACUREMA® PRIME, that produces recycled pellets with IV values similar to those of virgin PET material. All VACUREMA® systems are suitable for adding downstream equipment from EREMA to make complete inline production lines, for example for rPET flat film direct from post-consumer PET bottle flake that is suitable for direct food contact. In addition to this bottle-to-bottle recycling technology, EREMA will also be giving an insight into its extensive overall portfolio at its PETpoint stand. Besides complete repelletisingextrusion systems for every application, from the reclaiming of polyolefines to technical plastics, the range also features automatic melt filters, pelletising plants, compounding units, edge trim recycling systems and pre-shredding machines and silo systems. EREMA customers also benefit from decades of experienced know-how and the professional, worldwide service.

 

Christina Dort

Marketing Manager

Tel.: +43 (0)732 3190-105

Fax: -6305

ch.dort@erema.at

At this year's Drinktec (featuring an integrated PETpoint) from 14 to 19 September in Munich, the Austrian recycling specialist EREMA (www.erema.at) will be presenting its expertise in the field of technological, high-quality and cost-efficient plastic recycling in Hall B3, Stand 424. A focal point here will be the reprocessing of waste post-consumer plastic, in particular PET bottle flakes, to make recycled pellets that are suitable for food contact again, as documented by many national and international certification organisations. Unlike conventional, multiple-stage processing techniques, the patented VACUREMA® technology used for this purpose produces a highly pure material in one single pass with low specific energy consumption that is unrivalled. 

The modular VACUREMA® concept enables you to configure the perfect system in terms of both technology and economy for any application, according to the desired IV (IV – intrinsic viscosity as a comparative measurement for the molecular weight) of the recycled pellets made, ranging from the VACUREMA® BASIC (IV virtually the same as the starting material) and the VACUREMA® ADVANCED (IV increase up to 6%) to the top expansion stage, VACUREMA® PRIME, that produces recycled pellets with IV values similar to those of virgin PET material. All VACUREMA® systems are suitable for adding downstream equipment from EREMA to make complete inline production lines, for example for rPET flat film direct from post-consumer PET bottle flake that is suitable for direct food contact. 

In addition to this bottle-to-bottle recycling technology, EREMA will also be giving an insight into its extensive overall portfolio at its PETpoint stand. Besides complete repelletisingextrusion systems for every application, from the reclaiming of polyolefines to technical plastics, the range also features automatic melt filters, pelletising plants, compounding units, edge trim recycling systems and pre-shredding machines and silo systems. EREMA customers also benefit from decades of experienced know-how and the professional, worldwide service.

/

Christina Dort
Marketing Manager
Tel.: +43 (0)732 3190-105
Fax: -6305
ch.dort@erema.at
PETnology's Resource Guide
comPETence center

The comPETence center provides your organisation with a dynamic, cost effective way to promote your products and services.

Find out more

Cover
Our premium articles
comPETence
magazine

Find our premium articles, interviews, reports and more
in 3 issues in 2024.

Find out more
Current issue